Penco Pallet Rack
Pallet Rack Plus & Penco Pallet Rack is a carefully engineered system designed to provide highly efficient storage of palletized items. Combining design and excellence with the use of high strength steel to achieve a superior strength to weight ratio, Penco Pallet Rack can handle nearly any storage job you can give it.
The basic components of Penco Pallet Rack are Upright Frames and Beams. Each is manufactured to exacting tolerances to provide many years of dependable service at their rated loads.
The following pages detail the wide range of sizes, capacities and accessories that make Penco Rack one of the best values for your storage dollar.If you have Penco Pallet Rack or need help identifying the brand you have please give us a call 1-800-952-0151 or click here for a quote.
Penco Pallet Rack Plus is engineered for use in areas where high seismic activity or other severe conditions exist. To learn the seismic rating where your pallet rack will be in use, contact your Penco representative. Plus Beam End Connectors. The Plus beams have 4 connectors for a stronger connection between the beam and the upright post in conditions with greater lateral forces. The beam is welded 3” down from the top of the connector so loading is evenly distributed across all four connector prongs. The beam locking key is the same as used on standard beams. Plus Upright Frames with Large Footplate's. Each Plus upright frame has two 5” x 7” x 3/8” thick footplate's with four 9/16” diameter anchoring holes. The extra holes provide the installer with more choices for floor anchoring.
Penco Pallet Rack Upright Frames are available in five load capacities. A letter code stamped into the face of the post indicates the frame type. Depths of 30”, 36”, 42”, 48”, 54” and 60” are standard, but other depths and double-posted and cantilever frames are available. Standard heights range from 48” to 240” in 6” increments, but greater heights can be achieved when splices are used.
Beam heights adjust on 3” vertical centers, and are independent on each side of the frame. Beams of any type can be placed along the full height of the post; there are no dead spots on the post, even across a splice. Various load rated frames can be combined in a row of rack for maximum economy.
Penco Pallet Rack Upright Frames are furnished completely fabricated, welded into rigid units.